ZIM12-00505 Rev. 1
TransTech IV Service Manual
15
BASIC OPERATION (CONT’D)
Dipstick Exchange
Warning! Software V2.24. It is no longer necessary to empty the waste tank before
beginning an exchange. If beginning an exchange with fluid in the waste tank ensure
that there is less fluid in the clean tank than the remaining capacity of the waste tank.
Failure to do so will result in waste tank overflowing!
1. Fill the TransTech IV new fluid tank with the correct type and amount of
Transmission Fluid.
2. Connect TransTech IV power leads to the vehicle’s battery.
3. Press MODE button to select Dipstick operation. Dipstick indicator will be
illuminated.
4. Check the transmission fluid level. The Transmission fluid level can be
adjusted at this time using the DRAIN
or FILL
buttons. This will ensure the
service completes with the correct amount of fluid in the transmission.
5. Measure the vehicle dipstick and set spacer on dipstick fill tube/drain tube on
TransTech IV to the correct length. Insert the TransTech IV tube into the
vehicles dipstick tube.
