Motortech ITB 100 Series, Assembly Instructions Manual

Page: 4 / 30

4 Rev. 06/2022
Prior to use, read these assembly instructions carefully and familiarize yourself with the
product. Installation and start-up should not be carried out before reading and understanding
this document. Keep these assembly instructions readily available so that you can reference
them as needed.
1.1 What Is the Purpose of these Assembly Instructions?
This installation instruction serves as an aid for the installation of the product and supports the
technical staff with all maintenance tasks to be performed. Furthermore, this instruction is
aimed at preventing dangers to life and health of the user and third parties.
1.2 Who Are these Assembly Instructions Targeted to?
This assembly instructions provide a code of conduct for personnel tasked with the setup,
operation, maintenance, and repair of stationary engines. A certain level of technical knowledge
with respect to the operation of stationary engines and basic knowledge of the electronic
components used are necessary. Persons who are only authorized to operate the stationary
engine shall be trained by the operating company and shall be expressly instructed concerning
potential hazards.
1.3 What Symbols Are Used in the Assembly Instructions?
The following symbols are used in these instructions and must be observed:
Example
This symbol indicates examples, which point out necessary handling steps
and techniques. In addition, you receive additional information from the
examples, which will increase your knowledge.
Notice
This symbol indicates important notices for the user. Follow these. In
addition, this symbol is used for overviews that give you a summary of the
necessary work steps.
Warning
This symbol indicates warnings for possible risks of property damage or
risks to health. Read these warning notices carefully and take the
mentioned precautionary measures.
1 General Information