35
English
PROGRAMMING
FE
ATURES
Reading CTCSS/DPL Values
If you continue short pressing the PTT button,
as shown in the ”Entering Programming Mode”
on page 33 (Stage 2) the radio will move
forward to programming CTCSS/PL Codes.
When reading the values for CTCSS/PL Codes
the radio signals you the digit codes each time
you short press the PTT button. You will have
to read three digits as XTNi Series™ have up
to 122 codes available (refer to ‘Frequencies
and Codes Charts’ Section).
The following is an example of the order in
which your radio will be signaling the ‘118’
CTCSS/DPL code:
:
• Short press the PTT button. The radio will
signal you the first digit ‘1’, short press PTT
button again and the radio will show the
second digit ‘1’ and finally, short press PTT
again and radio will show the third digit ‘8’.
1
PTT
PTT
F
re
q
uencies
F
irst
Digit
Second
Digit
F
irst
Digit
Third
Digit
Second
Digit
Ex
amp
l
e
of
how
to
program
va
l
ues
1
1
8
