Motorola XT801 User Manual Download Page 5

Page: 5 / 67

US EN

Handset range

Optimal range is reached when

there are no other electrical

appliances working within the

range area. Any obstruction

between the base and handset

will also reduce the range

significantly.

Signal strength

When out of range of the

corded base, the screen shows

Out of range or no pwr at base

. If

you are on a call, the line will

hang up. Move back within

range. The cordless handset

will automatically reconnect to

the corded base.

Setting up

Important

The base must be plugged into

an electrical outlet at all times.

Do not connect the telephone

line cord to the telephone wall

jack until the handset is fully

charged. Only use the adapter

and telephone line cord supplied

with the product.

Connecting the base

Notes

•

In multi-handset packs, the

power adapter with the smaller

pin is for the charger.

•

If you have DSL high-speed

internet service, a DSL filter (not

included) is required. Contact

your DSL service provider for

more information.

•

Use only the provided power

adapter.

•

Steps 3 and 4 should only be

done once the handset is fully

charged.

Getting started

Summary of Contents for XT801




































































Search results

Summary of Contents for XT801

Reviews:

Related manuals for XT801

Brands by name

Popular brands

Motorola XT801, User Manual

Search results

Summary of Contents for XT801

Reviews:

Related manuals for XT801

Brands by name

Popular brands