Motorola XR400, Integration Manual

Page: 73 / 126

Administrator Console 3 - 45
1.
To update the countries list:
This option is provided to add a country not listed in the default countries list. The country information is provided by
Motorola in the form of HEX string. The HEX string is used to add a country to the default countries list. The country
that can be added to default countries list will depend on the region in which reader is configured to operate.
Customers should contact Motorola support centre to get the string to add a country to default countries list.
XR Series RFID Readers Power Level Settings
The power level of the reader is reduced with a 14 db digitally controlled attenuation. The lowest power setting is
full power, reduced by this amount. On the web
admin console the 0% should map to a power setting of 0. Using
the chart below the power level should be ~0.04 watts. The power level for both reading and writing tags is
logarithmic with the maximum power about 30dbm. This table describes the different values for different power
levels. The values are: dBm, Watts, %power, Low end setting, High end setting.
Table 3-5
Power Level Settings
Output Power
% Full
Power
Power Level Value (decimal)
dBm Watt From To
30 1.00 100 248 255
29.5 0.89 89 240 247
29 0.79 79 232 239
28.5 0.71 71 224 231
28 0.63 63 216 223
27.5 0.56 56 208 215
27 0.50 50 200 207
26.5 0.45 45 192 199
26 0.40 40 184 191
25.5 0.35 35 176 183
25 0.32 32 168 175
24.5 0.28 28 160 167
24 0.25 25 152 159
23.5 0.22 22 144 151
23 0.20 20 136 143
22.5 0.18 18 128 135
22 0.16 16 120 127
21.5 0.14 14 112 119
21 0.13 13 104 111
20.5 0.11 11 96 103
20 0.10 10 88 95
19.5 0.09 9 80 87
19 0.08 8 72 79
18.5 0.07 7 64 71
18 0.06 6 56 63
17.5 0.06 6 48 55
17 0.05 5 40 47
16.5 0.04 4 32 39
16 0.04 4 0 31