Motorola XR400, Integration Manual

Page: 47 / 126

Administrator Console 3 - 19
Yellowstone Tags, Read Lock Options
1.
To set the Read Lock Options for Yellowstone tags from the Modify RFID Tags drop down menu, see Figure
3-15 on page 3-14 . The set the Yellowstone Tags, Read Lock Options window appears.
Figure 3-20
Yellowstone Tags, Read Lock Options Window
2.
For the tag (on which read lock is to be applied) enter the Tag ID in the Select Tag ID field. Leaving the Select
Tag ID field blank, applies the read lock to all the Yellowstone tags in the vicinity.
3.
Enter the access password if the read lock operation to be performed on currently locked Yellow stone Tags.
Access password "00000000" is used as a default.
4.
Select the antenna port (to use for the read lock operation) from the Read Point drop-down list.
5.
Select the read lock option from the available radio buttons:
• Unlock (tag bank currently unlocked)
• Perma Unlock (permanently unlock the tag bank, it can never be locked)
• Lock (tag bank reading locked)
• Perma Lock (permanently lock the tag bank, it can never be unlocked)
6.
Select the memory bank check box(s) to select which memory bank the lock is applied to. One or more
memory banks can be selected.
7.
Keep Allow reader to switch to Session 0 for read unlock check box selected if a read unlock operation is being
performed.
8.
Click on Submit to perform the read lock operation. The lock option is applied in all of the selected memory
banks.
NOTE
For read unlock operation the Allow reader to switch to Session 0 for read unlock option must be
selected, if it is not selected the operation will fail.