Loop Recording (via Hubble Connect for VerveCam app) 19
en
15. Loop Recording (via
Hubble Connect
for VerveCam
app)
Note:
The App will remember the last used mode
and will go to that mode automatically when
connected.
Loop recording function allows you to record and
save video files in 5, 10, 20, 30 or 60 minutes looping
intervals. As long as the Camera has battery power,
videos will be recorded in a loop. At the end of a
looping interval, the Camera will continue to record
by erasing the oldest footage on that interval with the
newest. With this function, you no longer need to
worry that you will miss any important and special
moments should the memory card becomes full.
This function can only be selected in
Hubble
Connect for VerveCam
app.
15.1
Set Loop Recording Interval
1. Run
Hubble Connect for VerveCam
app on your
smartphone.
2. In the viewfinder screen, tap to select
Loop
Recording
mode
on the bottom panel.
3. Tap
to select an interval (5 mins, 10 mins, 20
mins, 30 mins or 60 mins).
15.2
Set Loop Recording Resolution
1. Run
Hubble Connect for VerveCam
app on your
smartphone.
2. In the viewfinder screen, tap to select
Loop
Recording
mode
on the bottom panel.
3. Tap
to select a video resolution (2560 x 1440,
1920 x 1080, 1280x 720).