manualshive.com logo in svg

Motorola SYMBOL MT2000 Series, User Manual

The Motorola SYMBOL MT2000 Series Service Manual is an essential resource for users of this versatile device. Easily download this comprehensive manual for free from our website. The user manual provides detailed instructions and troubleshooting tips, ensuring optimal performance and maximizing the benefits of your MT2000 Series device.

Share
Download
background image

MTSX RSS

CHANGE/VIEW

68P81074C50

6-75

Revert Announcement Group (or Revert Fleet ID)
Enter the Emergency Default Announcement TalkGroup in this field. This field contains the Emergency User
TalkGroup for Announcements during an emergency for the current personality. The Emergency Default
Announcement TalkGroup is a 3 digit hexadecimal number.

While in the emergency call state with tactical emergency disabled, your radio will monitor this talk group for
fleetwide announcement calls.

Revert Announcement Group (or Revert Fleet ID) Strapping

This field configures the transmit mode of Emergency Announcement Group or Emergency Fleet ID.  If set to
Clear or Secure, the Emergency Announcement Group or Fleet ID is forced to that particular transmit mode.
When set to Select, the user is allowed to select the secure or clear transmit modes via the radio's two position
concentric switch.

Revert TalkGroup (or Revert Subfleet)
This field contains the Emergency User TalkGroup for use during an emergency for the current personality. The
Emergency Default Talk Group is a 3 digit  hexadecimal number.

Database controlled parameter. Emergency Type II only parameter.

If the tactical emergency feature is disabled, then all emergency transmissions will be made on this default
talkgroup.

If tactical is enabled, then all emergency transmission are made on  the currently selected talkgroup. The only
exception would be when the radio has been dynamically regrouped and the dynamic regrouping mode is
selected, in which case the emergency transmission would be made on the dynamic regrouping talkgroup.

Revert Talkgroup (or Revert Subfleet) Strapping

This field configures the transmit mode of Emergency TalkGroup or Emergency Subfleet.  If set to Clear or
Secure, the Emergency Talkgroup or the Emergency Subfleet is forced to that particular transmit mode.  When
set to select, the user is allowed to select the secure or clear transmit modes via the radio's two position
concentric switch.

Emergency Hot Mic
This feature when enabled, will activate the Emergency Hot Mic operation (also known as Trunking Emergency
with voice to follow).  When an Emergency Alarm is generated, and the emergency alarm acknowledge is
received, the radio will automatically drop into emergency call mode and begin transmitting for the time specified
by the Tx Period with the mic unmuted.

IMPORTANT

This feature is mutually exclusive with normal emergency operation. That is, if this feature is
enabled emergency operation will always operate in this manner. 

Tx Period (sec)
When the Emergency Hot Mic feature is enabled, the Tx Period determines the time period the radio will be
transmitting with the mic unmuted, without user intervention.  The Tx Period ranges from 10-120 seconds in
increments of 10 seconds.  Default Tx Period is 10 seconds.

Summary of Contents for SYMBOL MT2000 Series

















































































































































































































































































































Reviews:

No comments

Related manuals for SYMBOL MT2000 Series

Zebex Z-6070 Series User Manual preview
Z-6070 Series
Brand: Zebex Pages: 29
Assa Abloy HID iCLASS RWK400 Installation Manual preview
HID iCLASS RWK400
Brand: Assa Abloy Pages: 12
Vantec UGT-CR905 Installation Manual preview
UGT-CR905
Brand: Vantec Pages: 7
Datalogic Gryphon DX30 Reference Manual preview
Gryphon DX30
Brand: Datalogic Pages: 199
Champtek IG300BT User Manual preview
IG300BT
Brand: Champtek Pages: 79
Billow Technology E01E User Manual preview
E01E
Brand: Billow Technology Pages: 90
Datalogic Heron D130 Quick Reference preview
Heron D130
Brand: Datalogic Pages: 22
Datalogic HandScanner MR User Manual preview
HandScanner MR
Brand: Datalogic Pages: 25
Datalogic Dragon D151 Reference Manual preview
Dragon D151
Brand: Datalogic Pages: 107
LaCie Imatumi Media Reader Quick Start Manual preview
Imatumi Media Reader
Brand: LaCie Pages: 2
Elatec TWN3 MIFARE Technical Manual preview
TWN3 MIFARE
Brand: Elatec Pages: 50
Manhattan 101967 Instructions preview
101967
Brand: Manhattan Pages: 2
Manhattan 163590 Instructions preview
163590
Brand: Manhattan Pages: 2
Manhattan 175432 Quick Manual preview
175432
Brand: Manhattan Pages: 8
Manhattan 150385 User Manual preview
150385
Brand: Manhattan Pages: 12
Welch Allyn SCANTEAM 3400PDF User Manual preview
SCANTEAM 3400PDF
Brand: Welch Allyn Pages: 94
Leuze electronic 50130487 User Manual preview
50130487
Brand: Leuze electronic Pages: 2
TaoTronics TT-BS030 User Manual preview
TT-BS030
Brand: TaoTronics Pages: 15

Brands by name

Popular brands

Load more brands