manualshive.com logo in svg

Motorola SYMBOL MT2000 Series, User Manual, Page: 151 / 304

Share
Download
Motorola SYMBOL MT2000 Series User Manual Download Page 151

CHANGE/VIEW

MTSX RSS

6-24

68P81074C50

MOTOROLA Radio Service Software
MTSX

Model:  

MAIN:CHANGE/VIEW:CONFIG:PHONE:CODES

Enter Code.

DTMF ACCESS/DEACCESS CODES

Num

Access Code

Deaccess Code

1

*1P#

*1P#

F1

HELP

F2

ADD

CODE

F3

F4

F5

DELETE

CODE

F6

F7

F8

F9

F10

EXIT

6.2.1.3.1  DTMF ACCESS/DEACCESS CODES

RSS LOCATION:

At the CHANGE/VIEW MENU, press                                 .

This screen allows you to set the Access/Deaccess Code pairs used for the Conventional Phone Operation.

The Access Code is used to keep unauthorized users from using the interconnect system on the repeater. The
Deaccess Code is used to tell the system that the phone call is finished and shorten the wasted air time. These
codes can be selected in the Auto Access Code on the CONVENTIONAL PERSONALITY PHONE OPTIONS
screen (F4/F6/F3/F8).

The valid symbols are as follows:

0-9

Digits

*

Asterisk

#

Pound

P

Pause

Function key descriptions and field definitions are on the following page.

PROGRAMMING PROCEDURE:

1.

Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.

2.

Press F3. The RADIO WIDE CONFIGURATION MENU appears.

3.

Press F4. The PHONE CONFIGURATION screen appears.

4.

Press F8. The DTMF ACCESS/DEACCESS CODES screen appears.

5.

Press Tab to select the desired field, or press the desired function key (F1 - F10).

6.

If a field is selected, enter the access or deaccess code via the keyboard.

F3

F4

F8

Summary of Contents for SYMBOL MT2000 Series

















































































































































































































































































































Reviews:

No comments