manualshive.com logo in svg

Motorola Symbol MiniScan MS1207FZY, Integration Manual, Page: 45 / 368

Share
Download
Motorola Symbol MiniScan MS1207FZY Integration Manual Download Page 45

Scanning

3 - 7

Beeper and LED Definitions

Table 3-1

 provides standard beeper definitions, and 

Table 3-2

 provides LED definitions.

Table 3-1    

Standard Beeper Definitions

Beeper Sequence

Indication

Standard Use

1 Beep - short high tone 

A bar code symbol was decoded (if decode beeper is enabled).

1 Beep - long high tone

Thermal shutdown. 

3 Beeps - short high tone 

(Symbol MS2207/2207VHD/3207 only)

Power-on or reset. Occurs immediately after the scanner is turned on, 
indicating that the system software is working properly. If three beeps 
occur during normal operation, it is due to a reset and any work in 
progress is lost. If this occurs often, contact Motorola Enterprise 
Mobility Support.

Parameter Menu Scanning

2 Beeps- short high tone 

Correct entry scanned or correct menu sequence performed.

1 Beep- hi/lo/hi/lo tone 

Successful program exit with change in the parameter setting.

2 Beeps - lo/hi tone 

Input error, incorrect bar code, or 

Cancel

 scanned, wrong entry, 

incorrect bar code programming sequence; remain in program mode.

Communication

4 Beeps - short high tone 

Communication error.

4 Beeps - hi/hi/hi/lo

Receive error.

3 Beeps - lo/hi/lo

ADF transmit error.

Table 3-2    

LED Definitions

LED

Indication

Red

Scanner is on.

Green

A bar code was successfully decoded.

Summary of Contents for Symbol MiniScan MS1207FZY

















































































































































































































































































































































































Reviews:

No comments