manualshive.com logo in svg

Motorola Symbol MiniScan MS1207FZY, Integration Manual, Page: 197 / 368

Share
Download
Motorola Symbol MiniScan MS1207FZY Integration Manual Download Page 197

Chapter 11 RS-232 Interface

Introduction

This chapter provides RS-232 host information for setting up the MiniScan XX07 Series scanner. The RS-232 
interface connects the MiniScan scanner to point-of-sale devices, host computers, or other devices with an 
available RS-232 port (e.g., com port).

If 

Table 11-2

 

does not list your host, set the communication parameters to match the host device. Refer to the 

documentation for the host device.

This scanner uses TTL RS-232 levels which interface with all PCs with no additional hardware.

Throughout the programming bar code menus, asterisks (

*

) indicate default values.

NOTE

Particularly noisy electrical environments may require a cable with an RS-232 transceiver. To obtain this 
cable contact Motorola Enterprise Mobility Support.

*

Baud Rate 9600

Feature/Option

*

 Indicates Default

Summary of Contents for Symbol MiniScan MS1207FZY

















































































































































































































































































































































































Reviews:

No comments