manualshive.com logo in svg

Motorola SRX 2200 MODEL 3.5, User Manual

Share
Download
Motorola SRX 2200 MODEL 3.5 User Manual Download Page 37

Removing and Attaching the
Accessory Connector Cover

The accessory connector is on the antenna side of the
radio. It is used to connect accessories to the radio.

NOTICE:

To prevent damage to the connector, shield it with
the connector cover when not in use.

1

To remove the accessory connector cover, rotate the
thumbscrew   counterclockwise until it disengages
from the radio.

NOTICE:

If the thumbscrew is too tight, use an Allen
wrench at   to loosen it first.

A

B

C

2

Rotate and lift the connector cover to disengage it
from the radio.

3

Slide the accessory connector cover over the
antenna and position at the base of the antenna.

4

To attach the accessory connector cover, insert the
hooked end   of the cover into the slot above the
connector.

5

Press the top of the cover downward to seat it in the
slot.

English

  

37

Summary of Contents for SRX 2200 MODEL 3.5













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands