manualshive.com logo in svg

Motorola SRX 2200 MODEL 3.5, User Manual

Share
Download
Motorola SRX 2200 MODEL 3.5 User Manual Download Page 210

Mode

Description

two 

PTT

 button presses within the

preprogrammed time limit.

Transmit Inhibit

This feature is available for APCO 25 trunking, Type II
trunking and Conventional operations for all APX radios.

When Transmit Inhibit feature is enabled, the radio stops all
transmission including voice and data. The radio can
receive messages but is not able to reply the
acknowledgment request of the received message.

User can physically control the transmission of the radio
especially during operation in hazardous environments with
this feature. An environment is considered hazardous when
the power emitted by the radio power amplifier could initiate
an explosion or other dangerous reactions.

When the Transmit Inhibit feature is disabled, the radio
functions according to its normal operations.

The radio sounds alert tone when user enters or exits this
feature and also when 

PTT

 is pressed.

NOTICE:

Acknowledgment of any messages required from
the radio is not transmitted if the Transmit Inhibition
is enabled.

Enabling Transmit Inhibition

Perform one of the following actions:

• Switch the preprogrammed Transmit Inhibit

switch to Transmit Inhibit enabled.

•

 or   to 

TxIn

. Press the 

Menu Select

 button

below 

TxIn

.

• Press the 

Transmit Inhibit

 programmable button.

English

210

  

Summary of Contents for SRX 2200 MODEL 3.5













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands