Motorola SRX 2200 MODEL 3.5 User Manual Download Page 186

Page: 186 / 236

Disabling the Sensor Temporarily

Short-press the preprogrammed

Sensor

button or

the preprogrammed

Menu Select

button to activate

the sensor timer.

The following scenarios affect the sensor state:

• If a gun or taser is removed from the holster

within the timer duration, the timer stops and
switches the sensor to disabled state. A tone
sounds and the radio displays

Sensor Disable

NOTICE:

The radio enables the sensor only when
all the guns or tasers are placed into the
holster. A tone sounds and the radio
displays

Sensor On

temporarily.

• If the timer expires without an event, a tone

sounds, the radio switches the sensor to enabled
state, and clears the sensor status from the
display.

• If the preprogrammed

Sensor

button or the

preprogrammed

Menu Select

button is long-

pressed, the over-the-air (OTA) sensor
notification is enabled.

Disabling the Sensor Permanently

Long-press the preprogrammed

Sensor

button or

the preprogrammed

Menu Select

button to

permanently disable the sensors.

A tone sounds and the radio displays

Sensor Off

While in this state, no events is reported over-the-air
(OTA), regardless of how many times the gun is
drawn, re-inserted or weapon is fired.

The radio generates a bad key tone if the sensor is
not allowed to be disabled or there is no sensor
connected to the radio when the preprogrammed
button or menu select button is pressed.

Long-press the preprogrammed

Sensor

button or

the preprogrammed

Menu Select

button again to

enable the OTA Sensor notification.

A tone sounds, and the radio displays

Sensor On

English

186

Summary of Contents for SRX 2200 MODEL 3.5












































































































































































































































Search results

Summary of Contents for SRX 2200 MODEL 3.5

Reviews:

Brands by name

Popular brands

Motorola SRX 2200 MODEL 3.5, User Manual

Search results

Summary of Contents for SRX 2200 MODEL 3.5

Reviews:

Brands by name

Popular brands