manualshive.com logo in svg

Motorola SRX 2200 MODEL 3.5, User Manual

Share
Download
Motorola SRX 2200 MODEL 3.5 User Manual Download Page 205

entry. Check with your dealer or qualified technician for
best selection to suit your usage.

1

Toggle the preprogrammed 

Keypad/Control Lock

button or switch to on.

The display shows 

Kypd/Ctrl Lock

.

2

Toggle again to unlock the controls.

Turning the Controls and Keypad
Buttons Tones On or Off

You can enable and disable the tones of Navigation
buttons, controls and keypad if needed.

• Turning the tones on or off using the preprogrammed

Mute

 button:

a. To turn the tones off or on, press the

preprogrammed 

Mute

 button.

• Turning the tones on or off using the radio menu:

a.  or   to 

Mute

.

b. Press the 

Menu Select

 button directly below

Mute

.

The display shows momentary 

Tones off

,

indicating that the tones are disabled or the
display shows momentary 

Tones on

, and you

hear a short tone indicating that the tones are
enabled.

Turning Voice Mute On or Off

You can enable and disable voice transmission, if needed.
Do one of the following to turn Voice Mute on or off. You
can use the options interchangeably depending on your
preference and the programmed functions.

• Turning Voice Mute off or on using the

preprogrammed 

Voice Mute

 button:

a. To turn the feature off or on, press the

preprogrammed 

Voice Mute

 button.

• Turning Voice Mute on or off using the radio menu:

a.  or   to 

VMut

.

English

  

205

Summary of Contents for SRX 2200 MODEL 3.5













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands