Motorola SM56, Quick Start User Manual

Page: 26 / 48

AT Cmd Function Mode Value Setting
13 V.PCM Only
14 V.PCM Auto
*TD Dial TX Level
DFV 0 - 15 TX Level 0 through -15 (default -9)
+A8E V.8 Origination Negotiation
DFV 0
Disable
1
Enable DCE-controlled V.8 orig neg
6
Enable DCE-controlled V.8 orig neg, use +A8x indications
V.8 Answer Negotiation
DFV 0
Disable
1
Enable DCE-controlled V.8 ans neg
5
Enable DCE-controlled V.8 ans neg, issue +A8x indications
V.8 CI Signal Call Function
DFV 00h - FFh Default is 00h
V.8bis Control
DFV 0 Disabled
1 Enabled - DCE controlled
2 Enabled - DTE controlled
+A8T V.8bis Tx Signal
DFV 0 None
1 Initiating MRe
2 Initiating MRd
3 Initiating Cre, low power
4 Initiating Cre, high power
5 Initiating CRd
6 Initiating ESi
7 Responding MRd, low power
8 Responding MRd, high power
9 Responding CRd
10 Responding ESr
V.8bis Tx Message 1
DFV x Hexadecimal octet coded string
V.8bis Tx Message 2
DFV x Hexadecimal octet coded string
V.8bis Signal Detection
DFV 0 Enable detection of initiating V.8bis signals
1 Enable detection of responding V.8bis signals
2 Enable detection of both V.8bis signals
V.8bis Message Detection
DFV 0 Disable detection of V.8bis messages
1 Enable detection of V.8bis messages
V.8bis Message Delay
DFV 0 No delay between tx V.8bis signal and message
1 1.5 second delay between tx V.8bis signal and message
+DR Data Compression Reporting
DFV 0 Disabled
1 Enabled
+DS Data Compression Direction
DFV 0 No Compression
1 Tx Only
2 Rx Only
3 Both Direction, Accept any direction
Data Compression Negotiation
DFV 0 Do not disc if V.42bis not negotiated as per Direction
1 Disconnect if V.42bis not negotiated as per Direction
Maximum Dictionary Size
DFV 512 - 65535 Default is 2048
Maximum String Size
DFV 6 - 250 Default is 32
+EB Break Selection
DFV 0 Ignore
1 Non-Expedited and Non-Destructive
2 Expedited and Non-Destructive
3 Expedited and Destructive
Timed
DFV 0 Transmission of L-SIGNAL shall not indicate length
1 Transmission of L-SIGNAL shall indicate length
Default Length
DFV 0 Do not deliver break to DTE
1 - 254 Break length in .01 seconds (Default is 100)