Motorola SM56, Quick Start User Manual

Page: 34 / 48

Table D: Bit Positions of Supported Events
Bit Event
0 Caller ID
2 Distinctive Ring
3 RING
4 DTMF Detection
5 Receive Buffer Overrun
6 Fax Calling (1100 Hz.)
7 Data Calling (1300 Hz.)
9 Presumed Hang-Up (SILENCE) Time-out
10 Presumed End-of-Message (QUIET) Time-out
18 RINGBACK
19 BUSY
20 DIALTONE
23 Playback Buffer Underrun
25 Fax or Data Answering Modem detected
27 Voice Detected
Table E: Parameter Types for AT+VTS
Type Meaning
D D = DTMF tone for default duration
{D,d} D=DTMF tone, d=duration
[F1,F2,d] F1=Frequency 1, F2=Frequency 2, d=duration
Note: Any number of parameters can occur on a single line, separated by commas.
If no DTMF tone or Frequency is given, then silence is generated for the given duration.