5. Expand the branch to see which ports are installed on the computer.
To install the SM56 ISA modem so that it is accessible through older application software and
DOS programs, COM port 2, 3, or 4 should be available. If none of these ports are available, you
must disable one of the COM ports in the BIOS.
5 Installing Modem Hardware
Hardware Installation:
Install the modem card as follows.
1. Power down the personal computer.
2. Locate a vacant bus connector (ISA or PCI, depending on your hardware) and insert the modem
card.
3. If using the SM56 Data/Fax/TAM/Speakerphone modem, connect the sound subsystem
interface cable(s) to the modem card (via the internal TAPI connector or using the audio jacks
-- refer to the information above on sound card compatibility.)
4. Connect the modem Line input to an analog phone jack using an RJ-11 phone cable. Optionally,
connect a telephone handset to the Phone input on the line interface card. The external
telephone cable connections are as follows.
5. Replace the personal computer cover and power the personal computer on.
Summary of Contents for SM56
Page 32: ...On 1 Off 0 ...
Page 44: ......
