2 INSTALLATION
11
6.0 mm (.24 inches) maximum
9.0 mm (.35 inches) maximum
2.5 mm (.10 inches).
There must be .10 inches (2.5 mm) between the wall and the underside of the
screw head.
9.
Place the SB6120 so the keyholes on the back of the unit are aligned above the
mounting screws.
10.
Slide the SB6120 down until it stops against the top of the keyhole opening.
After mounting, reconnect the coaxial cable input and Ethernet connection. Plug the
power cord into the +12VDC connector on the cable modem and the electrical
outlet. Route the cables so that they are not a safety problem.
Wall Mounting Template
You can print the following page to use as a wall mounting template.
Be sure you print it at 100% scale. In the Print dialogue window, be sure that
Fit To Page
is not selected in the Print dialog box.
Measure the printed template with a ruler to ensure that it is the correct size.
