2 INSTALLATION
10
You can mount the SB6120 horizontally or vertically. Do the following to mount your
SB6120 on the wall:
1.
See the
to print a copy of the template.
2.
Click
or choose Print from the File menu to display the Print dialog box.
The sample Print dialogue window shown below may vary slightly on your
computer, depending upon your operating system.
To print the template only, select Current page as the Print Range. Be sure you
print the template at 100% scale. Be sure No Scaling is selected for Scale to
paper size.
3.
Click
OK
to print the template.
4.
Measure the printed template with a ruler to ensure that it is the correct size.
5.
Use a center punch to mark the center of the holes.
6.
On the wall, locate the marks for the mounting holes.
7.
Drill the holes to a depth of at least 1 1/2 inches (3.8 cm). Use M3.5 x 38 mm (#6
x 11/2 inch) screws with a flat underside and maximum screw head diameter of
9.0 mm to mount the SB6120.
8.
Using a screwdriver, turn each screw until part of it protrudes from the wall, as
shown in the following illustration.
