Motorola RMU2080, User Manual

Page: 34 / 88

PROG
RAMM
ING
FEAT
URES
English
39
Entering Advanced Configuration Mode
Note: Before programming the features, make
sure your radio is set to the channel you
wish to program. You can do so before
entering Advanced Configuration Mode
or at any time during the Advanced
Configuration Mode by rotating the
Channel Selector Knob.
Note: 'Idle' Programming Mode is the stage of
the Programming Mode in which the radio is
waiting for the user to start the radio
programming cycle.
Entering Frequencies Values
RM Series radios have 9 9
frequencies for UHF and 27 for VHF.
Once you are in the 'Idle' Programming Mode,
you will be able to hear the Frequencies,
Codes, Auto-Scan , active channels settings
and Weather Channel enable/disable by short
pressing the PTT button to move along the
different programmable features.
Once in ‘Idle’ Programming Mode, the first
value available to change is Channel
number, you can change the channel by
rotating the Channel Selector Knob, voice
announcement will indicate channel selected.
Using SB1 and SB2 you can change
values. The value selected is announced
by voice prompt.
To read or modify Frequencies, Codes,
Auto-Scan, Active Channels or en able/
disable the Weather Channel, set the
radio to 'Advanced Configuration Mode' by
pressing and holding the PTT and SB1
buttons simultaneously for 3 to 5 seconds
while powering up the radio and until you
hear a voice prompt saying
"Programming Mode" and "Channel #".
The Weather Programming feature allows
to alternate the channel function, between
2 way radio channel and weather channel.
Also for weather channel function allows to
chose one of the 7 received frequencies.