Motorola RMU2080, User Manual

Page: 39 / 88

PROG
RAMM
ING
FEAT
URES
English
45
•
Example of Programming Auto-Scan
Auto-
Scan is the third Programming Mode and can be
set to either ON or OFF on a particular channel.
To set Auto-Scan to ON:
•
Enter into advanced Configuration Mode and
select the desired channel.
•
Short press the PTT button three times to enter
Auto-Scan Programming Selection Mode. The
radio will announce "Auto-Scan" and current
setting (Enabled or Disabled) , followed by
changing instruction - "To change, press side
button 1 or 2"
Example of Programming Active Channels
Active Channels allows you to modify the . of active
channels the radio will be programmed to support.
To set Active Channels:
Enter Programming Mode and select the
desired channel.
Short press the PTT button Four times to enter
Active Channels Programming Selection Mode.
The radio will announces "Active Channels"
and current value followed by changing
instruction.
Short press the SB1 or SB2 buttons until
you hear the number of channels desired.
•
•
•
Long press the PTT button. LED Indicator will
show a green heartbeat to indicate Idle
/
Programming state.
•
Long press the PTT button to exit
Programming Mode or turn radio OFF.
•
•
Example of Programming Weather Channels
Weather Channels mode allows you toggle a radio
channel between 2 way radio mode and weather alert
mode.
To set Channels to Weather mode:
Enter Programming Mode and select the desired
channel.
Short press the PTT button five times to enter
Weather Channels Programming Mode .
The radio will announce "Weather Channel and
Frequency used" plus how to change it.
•
•
•
Short press the SB1 or SB2 to enable/
disableLong press the PTT button.
LED Indicator will
show a green heartbeat to
indicate Programming state.
•
Long press the PTT button to exit
Programming Mode or turn radio OFF.
•