Motorola RMU2080, User Manual

Page: 85 / 88

92
VOX
Sensitivity
Level
Yes No Yes Yes
OFF
(level 0)
Front panel radio programming available in display
models by pressing PTT or MENU buttons and
scrolling down/up with "A" and "B" buttons to set
value. Long press PTT to save.
VOX, enable/
disable
Yes Yes Yes Yes OFF
Allows to use ‘hands-free’ mode connecting
microphone accessories. To enable connect
external accessory and power up radio.
Note:
The VOX sensitivity level default value is set
to OFF in the CPS settings. Before using this
feature, check VOX sensitivity level.
(1) To enter in Advanced Configuration Mode, press and hold both PTT and SB1 simultaneously for 3-5 seconds while turning radio ON (LED
will start to blink green). Short press PTT to get to the different programming options.
(2) Using CPS you can prevent this feature to be programmed via front panel radio.
(3) Contact your Motorola Point of purchase for enabling this feature and/or for radio models details.
(4) For Non-Display Models, feature can be enabled for front panel programming by assigning feature to SB1 or SB2. For Display models:
Feature can be enabled to any of the programmable buttons rather than the default ones. For more details refer to Programming Buttons Chart
or CPS Menus.
Features
Programmable Via
Advanced Conf.
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display