5 CONNECTING YOUR QIP RECEIVER
23
Connecting Your QIP Receiver to a Stereo TV (SDTV) and Stereo VCR
CABLE/
ANTENNA IN
INPUT
S-VIDEO
VIDEO
L
R
AUDIO
To TV
CABLE/
ANTENNA IN
INPUT
AUDIO
R
L
VIDEO
OUTPUT
AUDIO
R
L
VIDEO
Standard-Definition TV
VCR
QIP7100
IR Remote
Input
CableCARD
USB
Ethernet
SWITCHED
105-125 V
60 Hz
4 A MAX
500 W MAX
Serial
Optical
Audio
Digital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN
Audio
Left
Audio
Right
Video
Out
Y
Pb
Pr
L/R audio
connection
Video
connection
Coax Cable in
Connecting a Stereo TV (SDTV) and Stereo VCR
1.
Connect a stereo audio cable to the AUDIO OUT L and R connectors on the
QIP7100 Series receiver and the INPUT AUDIO L and R connectors on the stereo
VCR.
2.
Connect a video cable to the VIDEO OUT connector on the QIP7100 Series
receiver and the INPUT VIDEO connector on the stereo VCR.
3.
Connect a stereo audio cable to the OUTPUT AUDIO L and R connectors on the
Stereo VCR and the INPUT AUDIO LEFT and RIGHT connectors on the Stereo TV
(SDTV).
4.
Connect a video cable to the output video connector on the stereo VCR and the
input video connector on the Stereo TV (SDTV).
Note: You can also connect using the S-Video connectors if supported by your stereo
VCR.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your QIP Receiver to an HDTV — Video Only
on page 15.
