Motorola PTP 800, User Manual

Page: 336 / 379

Managing faults Chapter 6 Operation
phn-1478_005v000
6-46
Apr 2010
Table 6-16 Remote Management page SNMP attributes
Attribute Meaning
SNMP State
‘Disabled’ means that SNMP traps are not generated.
‘Enabled’ means that SNMP traps will be generated in
response to selected events, and sent to the network
management system.
SNMP Enabled Traps Select the events that will generate SNMP traps.
SNMP Trap Version Select the SNMP protocol version to be used for SNMP
traps.
SNMP Trap IP Address
Enter the IP address that will receive all SNMP traps.
This will normally be the network management system,
but it may be a separate trap receiver.
To disable trap generation, enter 0.0.0.0 in the IP
Address.
SNMP Trap Port
Number
Enter the port number of either the networked SNMP
manager or trap receiver. By convention, the default port
number is 162.
SNMP Community
String
The SNMP community string acts like a password
between the network management system and the
distributed SNMP clients (PTP 800 CMUs). Only if the
community string is configured correctly on all SNMP
entities can the flow of management information take
place. By convention the default value is set to ‘public’.
SNMP Port Number
Enter the port that the SNMP agent is listening to for
commands from a management system. By convention,
the default port number is 161.