Motorola MVME2301 Installation And Use Manual Download Page 85

Page: 85 / 167

PPCBug

5-5

26. Verifies the configuration data that is resident in NVRAM,

and displays a warning message if the verification failed.

27. Calculates and displays the MPU clock speed, verifies that

the MPU clock speed matches the configuration data, and
displays a warning message if the verification fails.

28. Displays the BUS clock speed, verifies that the BUS clock

speed matches the configuration data, and displays a
warning message if the verification fails.

29. Probes PCI bus for supported network devices.

30. Probes PCI bus for supported mass storage devices.

31. Initializes the memory/IO addresses for the supported PCI

bus devices.

32. Executes Self-Test, if so configured. (Default is no Self-Test.)

33. Extinguishes the board fail LED, if Self-Test passed, and

outputs any warning messages.

34. Executes boot program, if so configured. (Default is no boot.)

35. Executes the debugger monitor (i.e., issues the

PPC1-Bug>

prompt).

Using PPCBug

PPCBug is command-driven; it performs its various operations in
response to commands that you enter at the keyboard. When the

PPC1-Bug

prompt appears on the screen, the debugger is ready to

accept debugger commands. When the

PPC1-Diag

prompt

appears on the screen, the debugger is ready to accept diagnostics
commands. To switch from one mode to the other, enter

What you key in is stored in an internal buffer. Execution begins
only after you press the Return or Enter key. This allows you to
correct entry errors, if necessary, with the control characters
described in the

PPCBug Firmware Package UserÕs Manual

, Chapter 1.

Summary of Contents for MVME2301








































































































































































Search results

Summary of Contents for MVME2301

Reviews:

Motorola MVME2301, Installation And Use Manual, Page: 85 / 167

Search results

Summary of Contents for MVME2301

Reviews: