Set Environment to Bug/Operating System
MVME197LEIG/D1
A-9
A
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options
Default
Meaning of Default
Slave Address Translation Address #1
Slave Address Translation Select #1
Slave Control #1
Slave Enable #2 [Y/N]
Slave Starting Address #2
Slave Ending Address #2
00000000
00000000
01FF
N
00000000
00000000
This register will allow
the VMEbus address
and the local address to
be different. The value
in this register is the
base address of the local
resource that is
associated with the
starting and ending
address selections from
the previous questions.
The default is 0.
This register defines
which bits of the
address are significant.
A logical one “1”
indicates significant
address bits, logical zero
“0” is non-significant.
The default is 0.
This defines the access
restriction for the
address space defined
with this slave address
decoder. The default is
$01FF.
Do not setup and enable
the Slave Address
Decoder #2.
This is the base address
of the local resource that
is accessible by the
VMEbus.
This is the ending
address of the local
resource that is
accessible by the
VMEbus.
Solution Systems Technologies Inc.
720-565-5995 | [email protected] | www.solusys.com
Solution Systems Technologies Inc.
720-565-5995 | [email protected] | www.solusys.com
