Configure and Environment Commands
A-6
Installation Guide
A
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options
Default
Meaning of Default
Network Auto Boot Device LUN
Network Auto Boot Configuration Parameter
Pointer (NVRAM)
Memory Search Starting Address
Memory Search Ending Address
Memory Search Increment Size
Memory Search Delay Enable [Y/N]
00
00000000
00000000
02000000
00010000
N
LUN of a disk/tape
device currently
supported by the Bug.
Default is $0.
This is the address
where the network
interface configuration
parameters are to be
saved/retained in
NVRAM: these
parameters are the
necessary parameters to
perform an unattended
network boot.
This is where the Bug
begins to search for a
work page (a 64KB
block of memory) to use
for vector table, stack,
and variables. This must
be a multiple of the
debugger work page,
modulo $10000 (64KB).
In a multi-197
environment, each
MVME197LE board
could be set to start its
work page at a unique
address so as to allow
multiple debuggers to
operate simultaneously.
Top limit of the Bug’s
search for a work page.
Must be a multiple of
the debugger work
page, modulo $10000
(64KB).
There will be no delay
before the Bug begins its
search for a work page.
Solution Systems Technologies Inc.
720-565-5995 | [email protected] | www.solusys.com
Solution Systems Technologies Inc.
720-565-5995 | [email protected] | www.solusys.com
