Set Environment to Bug/Operating System
MVME197LEIG/D1
A-5
A
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options
Default
Meaning of Default
ROM Boot Abort Delay
ROM Boot Direct Starting Address
ROM Boot Direct Ending Address
Network Auto Boot Enable [Y/N]
Network Auto Boot at power-up only [Y/N]
Network Auto Boot Controller LUN
Network Auto Boot Delay
0
FF800000
FFBFFFFC
N
Y
00
5
Time in seconds that the
ROMboot sequence will
delay before starting.
The purpose is to allow
the user the option of
stopping the boot by use
of the Break key. The
time value is from 0
through 255 seconds.
First location tested
when the Bug searches
for a ROMboot Module.
This is the start of the
Flash memory space.
Last location tested
when the Bug searches
for a ROMboot Module.
This is the end of the
Flash memory space.
Network Auto Boot
function is disabled.
Network Auto Boot is
attempted at power-up
reset only.
LUN of a disk/tape
controller module
currently supported by
the Bug. Default is $0.
The time in seconds that
the Network Boot
sequence will delay
before starting. The
purpose of the delay is
to allow the user the
option of stopping the
boot by use of the Break
key. The time value is
from 0 through 255
seconds.
Solution Systems Technologies Inc.
720-565-5995 | [email protected] | www.solusys.com
Solution Systems Technologies Inc.
720-565-5995 | [email protected] | www.solusys.com
