Motorola MTP810Ex Feature User Manual Download Page 5

Page: 5 / 126

3.5.5 Emergency SDS Status........................................................................................... 48

3.5.6 Emergency Hot Microphone.................................................................................... 48

3.5.7 Alternating Hot Microphone..................................................................................... 49

3.5.8 Silent Emergency Mode...........................................................................................49

3.5.9 Invisible Emergency.................................................................................................50

3.5.10 Disaster Alert......................................................................................................... 50

3.5.10.1 Initializing Disaster Alert Calls..................................................................50

3.5.11 Exiting Emergency Operations.............................................................................. 51

Chapter 4: Main Menu............................................................................................... 53

4.1 Scrolling through the Menu....................................................................................................53

4.2 Menu Icons............................................................................................................................ 53

4.3 Messages.............................................................................................................................. 54

4.3.1 New Message.......................................................................................................... 55

4.3.1.1 Sending Messages to Private/Phone......................................................... 55

4.3.1.2 Sending Messages to Groups....................................................................55

4.3.1.3 Sending Store and Forward Messages......................................................55

4.3.1.4 Delivery Report.......................................................................................... 56

4.3.2 Inbox........................................................................................................................ 57

4.3.2.1 Entering the Inbox...................................................................................... 57

4.3.2.2 Receiving New Messages..........................................................................58

4.3.2.3 Using Submenus in the Inbox and the Outbox...........................................58

4.3.2.4 Embedded Number.................................................................................... 58

4.3.2.5 Storing Numbers from Messages...............................................................58

4.3.2.6 Calling Numbers in Messages................................................................... 59

4.3.2.7 Making Group Calls on the Talkgroup of the Message Sender................. 59

4.3.2.8 Immediate Message...................................................................................59

4.3.3 Outbox..................................................................................................................... 60

4.3.4 Call-Out (CO) Box....................................................................................................60

4.3.5 Wireless Application Protocol (WAP) Box................................................................60

4.3.6 Templates................................................................................................................ 60

4.3.6.1 Sending User-Defined Templates.............................................................. 60

4.3.6.2 Managing User-Defined Templates........................................................... 61

4.3.7 Predefined Templates..............................................................................................61

4.3.7.1 Viewing Predefined Templates.................................................................. 61

4.3.7.2 Sending Predefined Templates..................................................................61

4.3.8 Status Messages..................................................................................................... 62

4.3.8.1 Viewing a Status Message Number........................................................... 62

4.3.8.2 Sending Status Messages......................................................................... 62

4.3.8.3 Targeted Status Messages........................................................................ 62

6866588D06–RB

Contents

Send Feedback

Summary of Contents for MTP810Ex






























































































































Search results

Summary of Contents for MTP810Ex

Reviews:

Related manuals for MTP810Ex

Brands by name

Popular brands

Motorola MTP810Ex, Feature User Manual

Search results

Summary of Contents for MTP810Ex

Reviews:

Related manuals for MTP810Ex

Brands by name

Popular brands