Motorola MTP810Ex Feature User Manual Download Page 36

Page: 36 / 126

Feature

Description

Timed Talkgroup Change

Makes a predefined talkgroup the selected talkgroup for a specified
amount of time. While using the predefined talkgroup, the second
press of the One-Touch Button results in:

•

the radio returning to the previously selected talkgroup,

•

the radio restarting the predefined time, or

•

no action on the radio, depending on the configuration

After the timer expires, the radio returns to the previously selected
talkgroup.

Toggle Backlight

Toggles the backlight on or off.

Toggle BSI Encryption En-
abled or Disabled

Enables or disables BSI encryption.

Toggle DMO or TMO

Toggles between TMO and DMO modes.

Toggle Extra Zoom

Turns Extra Zoom on or off.

Toggle Hi or Low Audio

Toggles audio high or low.

Toggle Howling Suppres-
sion

Enables or disables Howling Suppression.

Toggle Man Down On or
Off

Turns Man Down feature on or off.

Toggle Screen Saver

Activates or deactivates the Screen Saver feature.

Toggle Talkgroup Scan

Turns the Talkgroup Scan feature in TMO Mode on or off.

Toggle Transmit Inhibit
Mode (TXI)

Turns Transmit Inhibit Mode on or off.

Unassigned

No feature assigned to this button.

Universal Time Display

Displays universal time on the home screen.

Volume Down

Press to decrease the volume by one level. Press and hold to contin-
uously decrease the volume to its minimum level.

Volume Up

Press to increase the volume by one level. Press and hold to contin-
uously increase the volume to its maximum level.

6866588D06–RB
Chapter 2: Getting Started

Send Feedback

Summary of Contents for MTP810Ex






























































































































Search results

Summary of Contents for MTP810Ex

Reviews:

Related manuals for MTP810Ex

Brands by name

Popular brands

Motorola MTP810Ex, Feature User Manual

Search results

Summary of Contents for MTP810Ex

Reviews:

Related manuals for MTP810Ex

Brands by name

Popular brands