Motorola MTP810Ex Feature User Manual Download Page 37

Page: 37 / 126

Chapter 3

Modes

This chapter contains information on available modes that the radio can operate in.

3.1

Trunked Mode Operation

Trunked Mode Operation (TMO) requires the switching and management infrastructure.

This operation mode enables various voice and data communication types, such as group calls and
short data service messages, as well as access to the infrastructure-related features such as packet
data.

Figure 2: Trunked Mode Operation

3.1.1

Entering TMO Mode

Procedure:

1 From the home screen, press Options.

2 Select Trunked Mode.

3.1.2

Making Group Calls in TMO

The Group Call is received by all members of the selected group who have their units turned on and
are connected through the network.

Procedure:

1 Press and hold the PTT button.

2 Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the

PTT button to listen.

6866588D06–RB

Modes

Send Feedback

Summary of Contents for MTP810Ex






























































































































Search results

Summary of Contents for MTP810Ex

Reviews:

Related manuals for MTP810Ex

Brands by name

Popular brands

Motorola MTP810Ex, Feature User Manual

Search results

Summary of Contents for MTP810Ex

Reviews:

Related manuals for MTP810Ex

Brands by name

Popular brands