Motorola MICOM-2ES Owner'S Manual Download

Page: 68 / 76

MICOM-2ES/2RS/2TS ALE Supple

•

DIR

Directory: configuration of the ALE address list.

•

AMD

Messages: preparation of AMD messages to be
sent with ALE calls.

Note

You can also edit, or prepare a
new message, on-line.

•

OPT

Options: configuration of the various ALE options,
such as PTT timeout, external alarm, and so on.

•

AUTO

Autodial parameters: shortcuts for ALE calls to
frequently called stations.

•

STOR

Store the changes made in the ALE programming
session.

ment to Owner’s Guide

_________________________________________________________________________________________________

Description

See Page …

Important

•

The

ESC

key is used to cancel a change you have made, if not yet

confirmed. If you have already saved changes, the ESC key will
only return to a previous screen of the ALE Programming menu.

•

When you end ALE programming, you must store the parameters
you defined.

If you press the

key to exit the programming mode

without first saving your changes, you will be prompted to store
the ALE configuration changes. Press

YES

to store the

configuration. If you press

, the configuration will revert to

the previous configuration, and any changes made in the current
ALE programming session will be ignored.

Programming Nets

When programming a net, you can set the net names, define the net members, add
channels, configure various options, copy parameters from a defined net or erase an
entire net.

Net Programming Overview

The net programming mode enables you to view and edit the configuration of each
net.
The configuration includes the following menus:

Summary of Contents for MICOM-2ES













































































Search results

Summary of Contents for MICOM-2ES

Reviews:

Related manuals for MICOM-2ES

Brands by name

Popular brands

Motorola MICOM-2ES, Owner'S Manual

Search results

Summary of Contents for MICOM-2ES

Reviews:

Related manuals for MICOM-2ES

Brands by name

Popular brands