Motorola MICOM-2ES Owner'S Manual Download | Manualshive

Page: 30 / 76

background image

MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide

Receiving and Transmitting Calls in ALE Mode

Note

The information appearing in this section updates the ALE
operating instructions presented in previous publications.
Therefore, if your radio set supports MIL-STD-188-141B, use only
the ALE operating instructions appearing in this Supplement.

The MICOM 2 supports the following types of ALE calls in accordance with
MIL-STD-188-141B:

•

Individual call –

call directed to a specific station.

•

Net call –

call directed to a net (a net is a preprogrammed group of stations).

•

Group call –

call directed to a group of stations.

•

AllCall –

call directed to all other stations simultaneously (broadcast call); can

also be used as a distress call.

•

AnyCall –

call directed to all other stations simultaneously, usually used to

detect new stations.

•

Wildcard call –

call simultaneously addressed to a selected group of stations

within a net, with wildcards used within the address to specify the desired
stations. For efficient use of wildcards, an appropriate station naming plan must
be in place.

•

Self call –

call using the station’s own address, generally used for test purposes.

•

Bidirectional call –

request for updating the LQA score with another station or

stations.

•

Sounding call –

used to build a link quality database. This database stores

ongoing information on the current quality of the various channels programmed
for use by your radio.

All types of calls, except for sounding calls, can also carry messages.

Note

MICOM 2 also supports the MultiNet feature. When this feature is
enabled, it can receive and transmit ALE calls in several different
nets (up to 20). See details on page 12.

During ALE calls, a link is established between the stations participating in the call.
During the link state, the radio operators have various options, many of them similar
to the options available in the channel mode. For a description of the link options, see
pages 19 to 23.

16

_________________________________________________________________________________________________

«
...
28
29
30
31
32
...
»

Summary of Contents for MICOM-2ES













































































Reviews:

No comments

Related manuals for MICOM-2ES

Brand: E+E Elektronik Pages: 2

Brand: Varec Pages: 24

Pacemark PM4410

Brand: Oki Pages: 2

Brand: Sangean Pages: 1

Brand: Sandstrom Pages: 4

Brand: unicore Pages: 7

Brand: Yaesu Pages: 120

Safety Radio Contact

Brand: Telcoma Automations Pages: 52

Brand: M-system Pages: 5

Brand: Paso Pages: 32

Brand: Bear TA Pages: 4

Brand: Gear4 Pages: 104

Brand: IROX Pages: 2

978 UAT/1090 ES

Brand: SkyGuardTWX Pages: 2

FiberLink 4160 Series

Brand: Artel Pages: 12

Brand: NPG Pages: 28

Brand: AOR Pages: 1

Brand: First Alert Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands