Motorola MC919Z Integrator Manual Supplement Download Page 40

Page: 40 / 96

4 - 8

MC919Z Integrator Guide Supplement

Singulation

Select

Menu > Config > Singulation

to view/configure the singulation control settings for each antenna.

Figure 4-8

Singulation Control Settings Window

This

Singulation

settings window includes the following fields:

•

Antenna ID

- Select an antenna ID to update the configuration values in the other fields.

•

Session

- The session number for the inventory operation.

•

Tag Population

- The approximate tag population in the RF field of the antenna.

•

Tag Transit Time

- The time in milliseconds that the tag typically remains in the RF field of the antenna.

•

State Aware

- Indicates if the antenna performs state aware or state unaware singulation.

•

Inventory State

- Select a tag of state A or B. Valid only for State Aware singulation.

•

SL Flag

- Valid only for State Aware singulation

•

Apply

- Apply configuration changes.

Summary of Contents for MC919Z

































































































Search results

Summary of Contents for MC919Z

Reviews:

Related manuals for MC919Z

Brands by name

Popular brands

Motorola MC919Z, Integrator Manual Supplement

Search results

Summary of Contents for MC919Z

Reviews:

Related manuals for MC919Z

Brands by name

Popular brands