Motorola M80NCA6TZ5AN Installation Manual Download

Page: 43 / 92

INSTALLATION

MTM800

Enhanced Mobile Terminal Installation Manual

Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into
the DIN Frame

Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the
relevant fixing tabs. Use all 6 tabs, if necessary, to hold it in place.

Figure 14 Mounting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame

The tabs are easily bent back by twisting a large flat-
bladed screwdriver into the slot behind the tabs.

For a more secure installation the top and rear of the
frame should also be secured with screws.

The demount tool can be used as an aid to mounting as
well as demounting.

Summary of Contents for M80NCA6TZ5AN





























































































Search results

Summary of Contents for M80NCA6TZ5AN

Reviews:

Related manuals for M80NCA6TZ5AN

Brands by name

Popular brands

Motorola M80NCA6TZ5AN, Installation Manual

Search results

Summary of Contents for M80NCA6TZ5AN

Reviews:

Related manuals for M80NCA6TZ5AN

Brands by name

Popular brands