background image

COPYRIGHT

MTM800

 

Enhanced Mobile Terminal Installation Manual

3

COPYRIGHT

Copyrights

© 2007 - 2010 by Motorola Inc. 

 

All rights reserved.

No part of this manual may be reproduced, transmitted, stored in a retrieval system, or 
translated into any language or computer language, in any form or by any means, without 
the prior written permission of Motorola Inc.

Computer Software Copyrights

The Motorola products described in this manual may include copyrighted Motorola 
computer programs stored in semiconductor memories or other media. Laws in the United 
States and other countries preserve for Motorola certain exclusive rights for copyrighted 
computer programs including, but not limited to, the exclusive right to copy or reproduce in 
any form the copyrighted computer program. Accordingly, any copyrighted Motorola 
computer programs contained in the Motorola products described in this manual may not 
be copied, reproduced, modified, reverse-engineered, or distributed in any manner without 
the express written permission of Motorola. Furthermore, the purchase of Motorola 
products shall not be deemed to grant either directly or by implication, estoppel, or 
otherwise, any license under the copyrights, patents or patent applications of Motorola, 
except for the normal non-exclusive royalty-free license to use that arises by operation of 
law in the sale of a product.

Trademarks

Motorola, the Motorola Logo and all other trademarks identified as such herein are 
trademarks of Motorola Inc. All other product or service names are the property of their 
respective owners.

Summary of Contents for M80NCA6TZ5AN





























































































Reviews: