Using your Answering Machine
29
3.
Press
P
and
,
to the flash time you want. (8 options
are available:
90
,
100
,
110
,
250
,
300
,
400
,
600
and
700MS
)
4.
Press
P
to save.
7.3
Set the Area Code
1.
Press
P
and
,
to select
SETUP BS
.
2.
Press
P
and
,
to select
AREA CODE
.
3.
Press
P
and enter the area code.
4.
Press
P
to save.
7.4
Reset All Settings
All personalized settings will be reset to default. Phonebook
entries, calls list and redial list will remain unchanged.
1.
Press
P
and
,
to select
RESET SETTINGS
.
2.
Press
P
and
,
to select
ALL SETTINGS
.
3.
Press
P
to select
YES
.
4.
Press
P
to reset all settings to default.
8. Using your Answering Machine
The answering machine records unanswered calls when it is
activated. It can store up to 59 messages within the
maximum recording time of 15 minutes. Each message can
be up to 3 minutes long. Your personal outgoing messages
can be up to 1 minute long.
8.1
Play Messages
Through the base:
1.
Press
s
.
2.
The new messages are played from the loudspeaker on
the base in the sequence they are recorded.
3.
Press
u
or
d
to increase or decrease the volume
during message playback respectively.
4.
During message playback, press the keys below to
perform the following functions:
s
Press to playback or stop playing
messages.
Summary of Contents for L401
