12
Getting to know your phone
Overview of the base
1
FIND
Press to find/page all registered handsets.
2
ANSWER ON/OFF/ANSWER MODE
Press to toggle answering machine mode between
ANSWER
OFF
,
ANNC & RECORD
and
ANNOUNCE ONLY
mode.
3
ANNOUNCE
In Idle: Short press to play the current announcement.
In Idle: Press and hold to hear a voice prompt of how to
record the personalized announcement of the current
answer mode, release key to stop recording.
4
VOLUME -
Decrease the loudspeaker volume by one level (0 to 8) in
idle, during message playback or during call screening.
5
VOLUME +
Increase the loudspeaker volume by one level (0 to 8) in
Idle, druing message playback or during call screening.
6
Charging LED - Green
Steadily ON: When the handset is put into base cradle for
charging.
7
In Use LED - Red
Steadily ON: During a call or when an extension phone
(another registered handset) or the built-in answering
machine is off hook.
Flashing at a rate similar to the incoming ring pattern: During
an incoming call.
Flash at a rate of 0.5s on and 0.5s off for 2 minutes: During
paging or registration.
8
DELETE
During message playback: Delete the current message.
In Idle: Press and hold to erase all read messages
(applicable only when messages in answering machine are
all read, new message(s) will not be deleted.)
9
SKIP BACKWARD
Press once to replay current message from the beginning.
Press twice to playback the previous message.
Summary of Contents for L401
