18
Using the phone
3.1.7
Answer a call
1.
When the phone rings and
flashes in the display, press
<
or press
J
to answer the call via the loudspeaker.
WARNING
When the phone is ringing, avoid holding the earpiece too
close to your ear as it may damage your hearing. Handsfree
activation can suddenly increase the volume in the earpiece
to a very high level. Make sure the handset is not too close
to your ear.
TIPS
If Auto Talk mode (see Section 6.6 for more details) is on,
simply lift up the handset from its base to answer the call.
The default setting is Off.
NOTE
An incoming call has priority over other events. Whenever
there is an incoming call, other operations in progress such
as phone settings, menu navigation, etc. will be ended.
3.1.8
Adjust volume
1.
During a call, press
,
to adjust the earpiece or
loudspeaker volume.
- The level is shown in the handset display, as VL1 up
to VL5.
3.1.9
Mute
Mute the microphone so that you can talk to someone else
in the room without your caller hearing you.
1.
During a call, press
M
.
- The microphone is muted.
2.
Press
M
again to turn the microphone back on.
3.1.10 End a call
1.
During a call, press
>
or put the handset on the
cradle.
After you hang up, the duration of your call is displayed for
around 2 seconds.
Summary of Contents for L401
