Motorola F5208, User Manual

Page: 46 / 56

30
• Pressing the Power button on the display or CPU Box
(when configured). Note that the default setting of the
OS disable this operation
• Turning the ignition switch off (optional configuration)
• Wake up event from a USB device (If capable and
enabled)
• Wake up event from an Ethernet device connected to the
CPU Box
• Ring Indication from the RS-232 port
Power Management Tips
• If you use an integrated WWAN radio, switching over to
the Standby mode is not recommended as this may lead
to a disconnection of the network connection.
• Do not switch off the MW810 Mobile Workstation while
it is in Standby mode. Before switching off, restore to
normal operation and then turn off the workstation.
• When the CPU is in a Standby or Hibernation mode, do
not connect or disconnect any external devices.
Brightness Control
Press once on the rotary knob to activate the on-screen dis-
play control. Scroll the knob to select BRIGHTNESS.
Scrolling right/left increases / decreases the brightness level.
Volume Control
Press once on the rotary knob to activate the on-screen dis-
play control. Scroll the knob to select VOLUME.
Scrolling right/left increases /decreases the sound level.
NOTE: If your display supports Bluetooth communication,
this control monitors the volume level of the audio stream to
your Bluetooth device.
Warranty very small format.book Page 30 Sunday, April 18, 2010 7:49 PM