Motorola F5208, User Manual

Page: 26 / 56

10
Display 2
Connection of Secondary display cable. The cable carries DVI,
RGB (“COMM & Video I/O Expansion Board” only), USB and
audio signals to the screen. On ALPR panel, Display 2 is DVI
only.
Display 1
Connection of a Primary display cable. The cable carries RGB,
USB and audio signals to the screen.
GPS
Connection to GPS antenna when an optional GPS module is
installed inside the CPU Box.
Mic In
Input jack for sound recording microphone.
Audio Out
Stereo headphones connection output. This output is also
used for external speakers, with a built-in power amplifier.
LAN 1
1GB/s Base-T Ethernet LAN port for LAN cable or Ethernet
device. The port includes a Link and Active indicators.
WLAN
Connection to RF antenna(s). To improve the quality and reli-
ability of a wireless link, install two antennas when internal
WLAN radio with RX space diversity is used. When only one
WLAN antenna is installed, connect the antenna cable to the
WLAN connector marked "Main".
Important: The WLAN connectors are reverse polarity SMA.
Video In
Standard Composite Video input for connecting external VCR
or video camera.
Important: The Video In input is supported only when the
COMM & Video I/O Expansion Board is installed (see Figure
2).
6
7
8
9
10
11
12
13
Warranty very small format.book Page 10 Sunday, April 18, 2010 7:49 PM