Installation Guide
5
1
Introduction
The Motorola Solutions EX-3524 and EX-3548 are Gigabit Ethernet Layer 2 switches with either 24 or 48
10/100/1000-BASE-T ports, and four
Small Form Factor Pluggable
(SFP) transceiver slots for fiber connectivity. The
switches are built with leading-edge technology to deliver reliable high-performance connectivity for your data
network.
All of the 10/100/1000 Mbps ports on the switches support both the IEEE 802.3af and IEEE 802.3at-2009 PoE
standards.
Each switch also includes an SNMP-based management agent, which provides both in-band and out-of-band
access for managing the switch.
This document is written for the professional installer deploying EX-3524 and EX-3548 switches.
1.1 Unpacking
Verify that you have the equipment listed below:
•
EX-3524 or EX-3548 switch
•
Rack Mounting Kit containing two brackets and eight screws for attaching the brackets to the switch
•
Console cable— RJ-45 to DB-9
•
Four adhesive foot pads
•
EX-3524/EX-3548 Layer 2 Gigabit Ethernet Switches Installation Guide
(this document)
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact Motorola Solutions Support immediately. Contact information is available at
https://portal.motorolasolutions.com/Support/US-EN
.
1.2 Document Conventions
The following graphical alerts are used in this document to indicate notable situations:
NOTE
Tips, hints, or special requirements that you should take note of.
CAUTION
Care is required. Disregarding a caution can result in data loss or equipment
malfunction.
