manualshive.com logo in svg

Motorola ET1, Integrator Manual

Share
Download
Motorola ET1 Integrator Manual Download Page 116

7 - 16 ET1 Enterprise Tablet Integrator Guide

Figure 7-11

Enter Parameter To Create Volume Dialog Box

5.

Touch 

OK

. The message 

Successfully Created the Volume

 appears briefly.

If the size of the volume is very large, a progress bar displays.

Mount Volume

To mount an encrypted volume:

1.

Touch 

Mount Volume

.

2.

Touch 

sdcard

 or 

internal

.

3.

Touch 

OK

.

4.

Select a volume.

5.

Touch 

OK

.

List Volumes

To view a list of the encrypted volumes:

1.

Touch 

Volume List

.

2.

Touch 

sdcard

 to list volumes on the microSD card or 

internal

 to list volumes on internal storage.

3.

Touch 

OK

. The 

List of EFS Volumes

 dialog box appears with all the volumes of the selected storage 

location.

4.

Touch 

OK

.

Unmount Volume

To un-mount an encrypted volume:

1.

Touch 

Unmount Volume

.

2.

Touch 

sdcard

 to list the mounted volumes on the microSD card or 

internal

 to list the mounted volumes on 

internal storage.

3.

Touch 

OK

.

4.

Select the volume to un-mount.

5.

Touch 

OK

.

Summary of Contents for ET1

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands