November 2008
9980384R89-E
5-2
Programming the Radio with Customer Programming Software (CPS) (DTR410 Only)
: Creating the Private Con-
Creating the Private Contacts
You need to enter the contact information for a radio before you can make a Private Call to it. For more details
on Private Call, see
“ Types of Calls” on page 2-3
“.
1. Right-click
Privates
, on the left of the CPS screen, and choose “Add”.
2. Enter the
Unit ID
of the radio you are calling. This is the only field that is required. All other fields below
are optional.
3. Enter the
Name
of the radio you are calling. This gives an easier way of remembering the contact, rather
than just relying on the numeric Unit ID.
4. Enter the
Channel
where the call takes place.
5. Enter the desired contact (the
Homegroup
) that you want to change to when the call ends, or when the
radio is idle for over 30 seconds.
6. Enter the desired
Ringer
tone you want to hear, when receiving a call from this contact.
Summary of Contents for DTR410 - On-Site Digital Radio
