Motorola DTR410 - On-Site Digital Radio, User Manual

Page: 55 / 84

9980384R89-E November 2008
Radio Programming : Settings 4-9
3. Scroll to select Radio History and press under Select .
TX is the total amount of transmit time. RX is the total amount of receive time. IDL is the total time the
radio has been turned on but not receiving or transmitting.
Reset Defaults
Choosing this option resets your radio back to factory default settings. All settings are reset, and all
Contacts in the radio are deleted.
NOTE: :Reset Default is only used to reset a radio completely
From the Program Menu, scroll to select Reset Default
and press under
Select.
Scan Lists
This menu allows you to scan select PublicGroup contacts. Your radio always scans for
PrivateGroup contacts you are a member of and for calls to your Private ID.
The Scan feature is turned On/Off in the Advanced Menu of User Mode.
Your radio can scan up to 10 PublicGroups per channel. Scan can be turned on and off from the
Advanced Settings menu of User Mode, but what groups are scanned can only be changed in
Programming Mode .
To access Scan Lists
1. From the Program Menu, scroll to select Settings and press under Select .
2. Scroll to select Advanced and press under Select .
3. Scroll to Scan Lists and press under Select .
4. Select the channel you wish to change the Scan List on.
5. A check mark indicates which PublicGroups are scanned on that channel.
6. Use the left option key to remove or add groups to your scan list.
Manager Mode
Manager Mode provides access to Remote Disable, Remote Monitor, and Remote Time functions in
the User Menu.
The Manager Mode can only be accessed through the Programming Mode. After entering
Programming Mode, proceed as follows to access the Manager Mode.
1. From the Program Menu, scroll to select Settings and press under Select .
2. Scroll to select Advanced and press under Select .