Motorola DSR-4550, Operator'S Manual, Page: 58 / 98

3
48
GigE Subnet Mask Menu
Use the following procedure to set and view the GigE Subnet address (range:
000.000.000.000 to 255.255.255.255) for the upper Ethernet port on the back panel
of the DSR-4550. The GigE subnet mask is represented in the common dotted-
decimal format. Contact the network administrator for details about configuring the
GigE port for operation on your local network.
Press the

buttons until the GigE Subnet Mask menu appears (shown below).
Press the
4
button until the cursor is at the Subnet Mask label, and press the
ENTER button to move into the field. Use the
4
buttons to select the digit to
change and then, while the cursor is on that digit, press the

buttons to display
the desired value. Repeat this process for each applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
GigE Default Gateway Menu
Use the following procedure to set and view the GigE Default Gateway address
(range: 000.000.000.000 to 255.255.255.255) for the upper Ethernet port on the
back panel of the DSR-4550. The GigE Default Gateway is an address that is
represented in the common dotted-decimal format. Contact the network
administrator for details about configuring the GigE port for operation on your
local network.
Press the

buttons until the GigE Default Gateway Address menu appears
(shown below).
Press the
4
button until the cursor is at the Default Gateway label, and press the
ENTER button to move into the field. Use the
4
buttons to select the digit to
change and then, while the cursor is on that digit, press the

buttons to display
the desired value. Repeat this process for each applicable digit to be changed.
Press the ENTER button to confirm the selection and exit the field.
E 255.255.255.000
 PORT GigE  Subnet Mask
E 192.168.000.001
 PORT GigE  Default Gateway