Motorola DSR-4550, Operator'S Manual, Page: 40 / 98

3
30
Reset Menu
The Reset menu allows the user to reset the unit to the factory default settings or
perform a power cycle. Press the

buttons until the Reset menu appears (shown
below).
Reset Type Field Default: No
Press the
4
button until the cursor is at the Reset Type label, and press the ENTER
button to move into the field. Press the

buttons to display the two options:
Factory Defaults and Power Cycle, which are explained below.
Factory Defaults Option
Caution: Selecting this reset option deletes all defined setups and downloaded
information. This operation interrupts service output, so use it carefully.
The Factory Defaults option allows the user to reset the system to the programming
values originally set by the factory firmware. When the option is shown, press the
ENTER button and a caution message is displayed:
Press any arrow button (
4
) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed.
During factory reset, the following message is displayed:
Power Cycle Option
The Power Cycle option reboots the DSR-4550 without losing internal user setup
information or downloaded network information. When the option is shown, press
the ENTER button and a caution message appears indicating that the current
service will be interrupted if the action proceeds.
E No
 RESET  Reset Type
Press E to continue or to stop
CAUTION: IRD memory will be reset
Press E to continue or to stop
Factory Default reset in progress. . .
Press E to continue or to stop
CAUTION: Reset will interrupt service