manualshive.com logo in svg

Motorola DSR-4550, Operator'S Manual, Page: 31 / 98

Share
Download
Motorola DSR-4550 Operator'S Manual Download Page 31

DSR-4550

  

21 

Operating the DSR-4550

Modulation Menu

Note: This menu is not available when the ASI In option is selected. That option is 
located in the Manual Tune menu (described on page 18).

This menu, together with the Manual Tune menu, allows the user to initially 
acquire a DigiCipher II signal. Press the 



 buttons until the Modulation menu 

appears. Press the ENTER button to continue.

When either the DCII-MAN, 8PSK (Phase Shift Keying Modulation with 
turbocodes), or DVB-MAN, the user must additionally specify a Symbol/Code/
Format combination.

Mode Field

Default: DCII-AUTO

Press the 

4

 button until the cursor is at the Mode label, and press the ENTER 

button to move into the field. Press the 



 buttons to display the options: 

DCII-AUTO, DCII-MAN, 8PSK (Phase Shift Keying Modulation with 
turbocodes), or DVB-MAN. Select a mode and press ENTER to exit the field. 

Note: In any of the non-auto modes [i.e., DCII-MAN, DVB-MAN (both manual 
modes) or 8PSK (Phase Shift Keying Modulation with turbocodes)], the DSR-4550 
only searches for a signal that matches what is set in the Symbol/Code/Format field. 
If DCII-AUTO is selected, the DSR-4550 searches through all available combina-
tions to acquire a signal, and then remains parked on a signal once it is acquired.

       E                     DCII-AUTO  19.51      3/4      Comb

MODULATION    

Mode       Symbol  Code  Format

       E                      DCII-MAN   19.51      3/4      Comb

MODULATION    

Mode    

Symbol  Code  Format

       E                      DVB-MAN    19.510000    3/4

MODULATION    

Mode        

Symbol     

Code

       E                      8PSK             19.510000     3/4 (2.11)

MODULATION    

Mode          

Symbol     

Code

Summary of Contents for DSR-4550



































































































Reviews:

No comments