manualshive.com logo in svg

Motorola DS9208, Product Reference Manual, Page: 64 / 440

Share
Download
Motorola DS9208 Product Reference Manual Download Page 64

4 - 18 DS9208 Product Reference Guide

Decoding Illumination (Hand-Held Mode Only)

Parameter # 298

When in hand-held mode, selecting 

Enable Decoding Illumination

 causes the digital scanner to flash 

illumination to aid decoding. Select 

Disable Decoding Illumination

 to prevent the digital scanner from using 

decoding illumination.

Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the 
distance to the target increases.

Post Decode Illumination

Parameter # 809 

This parameter controls illumination after decode. Select 

Always Off

 to turn off illumination immediately after 

decode. Select 

Always On

 to keep Illumination on after decode so the scanner is ready for next decode, or to 

keep illumination on until timeout.

*

Enable Decoding Illumination

(1)

Disable Decoding Illumination

(0)

Always On 

(0)

*Always Off

(1)

Summary of Contents for DS9208

























































































































































































































































































































































































































































Reviews:

No comments